i9x-Tinywaist Features
3 clicks to reconnect the drive (no need to disconnect the cable)
5 clicks to turn on write protection
All-aluminum body with multiple grooves to effectively increase the cooling effect
Multi-color LEDs
JEYI i9X Tinywaist Display Visual M.2 NVMe Protocol SSD Enclosure
Built-in RTL9210 single protocol 10G high-speed master control theoretical read/write speed up to 1000M. Only support M.2 NVMe protocol
Supports TRIM, ASPM, UASP acceleration, and sleep mode
Plug-and-play, allowing data transmission across multiple devices such as desktops, laptops, cell phones, tablets, cameras, etc. at high speed across platforms and scenes
JEYI insists on using the high cost superconducting thermal conductivity pad and all-aluminum heat dissipation method to prevent the disk from being "baked" in the enclosure and reducing the life of the disk.
JEYI i9X can read and write for a long time with high intensity, which is suitable for professional-level uninterrupted applications. Can run Win To Go, VmWare virtual machine for a long time, large games, large 8K RAW video editing and other high-intensity professional applications
Superior Thermal Efficiency
Amplified side aluminum fins for increased heat dissipation. Unleash superior cooling power
It Can Also Display
Conncecting USB 2.0 - 5 seconds Orange
Conncecting USB 3.0 5G - 5 seconds Green
Conncecting USB 3.2 10G - 5 seconds Purple
Write-protected - remains in a static blue state
Reading - the light flashes rapidly in succession
Sleep Mode - multi-color breathing light effect
After Safe Ejection - in stand by mode - breathing light effect for "USB 2.0 Orange" "USB3.0 Blue" "USB3.1 Purple"
Disk Partition Information
1G File Transfer in 1 Second
NVMe enclosure adopts USB 3.2 Gen 2 transfer speed up to 10Gbps
How to set/exit write protection
Enter write protect: touch the screen 5 times (red light to long blue)
Exit write protect: touch the screen 5 times(long blue light to red light)
Note: Write protection with memory function, so as long as you don't exit the write protect function, it will remain in protected mode
1 minutes into sleep mode to save energy
If the SSD case goes into sleep mode, you need to do a read action on the drive to exit sleep mode.
Note: Sleep time can be modified by firmware
Reconnect the drive without re-plug cable
JEYI exclusive patent: When you exit the drive, you don't need to unplug the cable, just click the screen 3 times to reconnect the drive.
Only Support M.2 NVMe
Supports M.2 NVMe (M-Key,B&M-Key)
RTL9210 Single M.2 NVMe Protocol
The RTL9210 is a USB bridge that combines a USB device with a PCI Express (PCle) controller
Supports TRIM, ASPM, UASP Acceleration, and Sleep Mode
